Martel-electronics MECP100 User Manual download pdf

www.martelcorp.com

Tel: (603) 434-1433 800-821-0023

Fax: (603) 434-1653

Martel Electronics

3 Corporate Park Drive

Derry, NH 03038

Rev C 1/13 P/N 0219057

MECP100

Pneumatic Hand Pump

Operating Instructions

The Martel MECP100 Hand Pump is designed to be a simple to use

pressure and vacuum source for calibrating process control

instrumentation. Combined with one of our pressure calibrators, the

MECP100 makes a complete Pressure/Vacuum Calibration System.

Operation

The drawing shows the operation of the controls on the MECP100. The

pump is designed for use with ambient air only. If there is a possibility that

contaminants may enter the pump the optional filter (Martel P/N 54-54067)

should be installed at the output fitting.

CAUTION: Do not connect the pump to a pressure source.

1 2

www.martelcorp.come-mail: [email protected]: (603) 434-1433 800-821-0023 Fax: (603) 434-1653 Martel Electronics 3 Corporate Park Drive

5. Operate the pump handles several times and recheck for contamination.6. Clean the o-ring assembly and the o-ring on the retention caps with I

No comments

Martel-electronics MECP100 User Manual